erwinhart schreef:
Belgiquebasterd schreef:
Effe gegoogled:
Citaat:
P0601 OBD-II Trouble Code
Technical Description
Internal Control Module Memory Check Sum Error
What does that mean?
Basically that means that there is an interal fault in the Powertrain Control Module (PCM). There have been many reported PCM failures on Chrysler/Dodge products although it is possible for this to happen on any vehicle. In Dodge/Chrysler products, a P0601 trouble code means that a serial communication failed inside the computer at least 6 times.
Symptoms
Likely, no symptoms will be discernible to the driver, other than the illuminated Check Engine Light. Typically the engine runs fine, gauges work, etc.
Causes
A code P0601 in most cases means the PCM has gone bad. This is possibly due to a short-circuit inside the PCM. Or, if you disconnect the wires/connector from the PCM while the battery is still connected, that may also cause this code.
Possible Solutions
With a P0601 OBD-II trouble code, the most common fix is to replace and reprogram the PCM. In a few cases the dealer may be able to reflash the PCM and get it working. But more than likely the PCM will need to be replaced and reprogrammed (we recommend you take it to a dealership for this). The good news is it *may* be covered under your emmissions warranty. So even if you're out of bumper-to-bumper warranty or powertrain warranty, check your warranty guide or dealer to see if this is covered.
Other people have reported that they cleared the code only for it to return again and again. Keep in mind that most shops can replace the PCM but not all can program it.
oke'
en nu het NL
mijn techniche engels is niet zo

Meneer is niet gauw tevreden
Techische beschrijving
Betekent dat er een interne fout is in de PCM (motorcomputer). Er zijn vele problemen met PCM's gemeld bij Chrysler/dodge produkten, alhoewel het bij ieder voertuig voorkomt. Bij chrysler/dodge producten betekent een P0601 code dat er 6x een communicatiefout is gemeld in de computer.
Symptomen:
Meestal zijn er geen symptomen merkbaar, behalve het 'check engine light'. Meestal loopt de motor goed, meters werken,...
Oorzaak:
Een P0601 betekend in de meeste gevallen dat de PCM slecht is. Dit is mogelijk door een kortsluiting binnenin de pcm. Deze code kan ook echter het gevolg zijn wanneer je draden/connecters verwijderd van de PCM zonder eerst de batterij af te koppelen.
Mogelijke oplossingen:
Bij een P0601 code is de meest voorkomende oplossing het vervangen en herprogrammeren van de PCM. In sommige gevallen kan de dealer de PCM reflashen (herprogrammeren) en het oplossen. Maar meer dan waarschijnlijk moet de PCM vervangen en geherprogrammeerd worden.
Zo dat is het belangrijkste vertaald, faktuur volgt
